PLEASE NOTE THIS IS A CLEARANCE ITEM. THERE IS NO RETURN/REFUND ON THIS PRODUCT.
The Billow v3 is a complete redesign of the Billow v2. We took in all the suggestions from the community to make the Billow v3 the best it can be! When designing the Billow v3, we primarily focused on airflow, flavor, and the convenience of filling and building. The adjustable cyclops airflow holes on the Billow v3 are larger to provide more airflow to your coils. We also implemented a center airflow design that provides slightly more airflow and hits the back side of your coils to bring out the flavor of your e-juice. Top filling is very convenient by simply pulling the top cap to access the fill port and closing it shut when you're done refilling. Juice flow control via turning of the top cap is available for those who want to restrict the amount of e-juice that is being wicked or to prevent oversaturation. Finally, the build deck is now a 2 post Velocity style deck allowing you to build perfectly centered coils every time!
Features:
- 23mm Diameter
- 4.6ml Tank Capacity
- 2mm Diameter Post Holes
- 2 Post Velocity Style Deck
- 2 Adjustable Bottom Cyclops Airflow Holes
- Center Airflow
- Top Fill
- Juice Flow Control
- PEEK Insulator
- Rebuild & Rewick Without Emptying E-Juice
Additional Glass Section for the Billow v3 can be purchased here: /billow-v3-billow-v3-plus-glass/
Includes:
1x Billow v3 RTA by EHPRO and Eciggity
1x Delrin Drip Tip
1x Extra Glass
1x Japanese Cotton Pack
1x Bag of O-Rings, Screws, Wire and Hex Tool
Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.
Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. Eciggity will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.
63 Reviews Hide Reviews Show Reviews
-
billow v3
Love it. Been using a 70/30 in it, no leaks, several hits before starts getting dry, no burnt hits. I would recommend
-
Love this tank!!!
I have had all the billows but this one is the best yet!! Bigger build deck, top fill, much better air flow, and still 5 mls!!!!! I've never seen a company get me my order in three days when I ordered it on Friday!! Damn your shipping is the best!!
-
my review
PROS... -Compared to Billow V2, V3 has significantly more airflow and is easier to build on. However there are some areas which need vast improvement. - love the top fill. no leaking. CONS... -Airflow valve turns way too easy. Why is there even an adjustment for air? Open her up all the way. Every time I hit I would find the airflow was closed. I could not find a way to tighten the ring, so i used vice grips to bend it, now it doesn't rotate at all, but i have vice grip marks on my new RTA - Juice control shut off may shut off 80% VG, but does not even slow down 65% - When top is screwed down to the build deck, it must be tightened down enough to open the juice flow holes. However, in doing so, it is impossible to get access to the build deck without 2 pliers. This scratches the paint. -There is not enough grip on the ring between the glass and air flow. Thus, when attempting to get to the build deck, the glass unscrews, or the RTA unscrews from the mod. real pita. SUMMERY.... Although I prefer the V3 over the V2, I am really disappointed with my purchase. Would have spent $10 more for better build quality. Incidentally, I am looking to see what V4 offers. However, I may switch to another brand, as there are similar RTA's. Hope this helps, Vape on!
-
Very good RTA
Took me 2 tries to get wicking right. Once it was set, the vape quality and the production is crazy! Almost like an RDA
-
leaky wobbly piece of junk
there is no happy medium on the wicking of this pile of dung. if you get it to feed juice to the coils, it floods and leaks, getting enough cotton in it to stop the flooding and leaking, all you get is no flavor and dry hit after dry hit. the build quality of this tank is absolute garbage. the 510 threads are so screwed up, that to get it to keep from wobbling around on the mod, you have to tighten it so far that it is impossible to get it off the mod without breaking the glass. the juice flow control is so loose, that taking a drag will cause it to move. after two or three drags, the flow controll is either open enough to cause flooding, or completely closed, causing dry hits. the top fillis so tight that it takes ridiculous measures to get it to open or close, yet it still manages to leak.
-
Good tank, but leaks at the top fill!
I love the flavor/vapor that the v3 puts out. I was a huge fan of the v2, and for me, the bottom fill was not that "hard" of a task of doing to. I loved it because I had no leaking what so ever on the v2. The v3 on the other hand, at first, seems to be flawless. If wicked properly, which isn't too hard, then you should have no leaking through the airflow. But....when my mod is resting sideways, the juice always tends to seep out of the top where the top fill is. Its also inevitable that every time you fill it, you'll have to wipe off excess juice when closing the top cap. Id rather have the top cap be where you flip it off, or unscrew it, so this could prevent excess juice from having to be wiped off EVERY TIME. That being said, I'm going to try change out my o-rings in my top fill, maybe the other o-rings will seel the juice off better, to prevent it from leakage. Love the Billows....but this v3 seems to have set back from the v2
-
Best billow yet!!!
I have to say I did not think there would be a tank that put my billow v2 up for a challange but the v3 was deffo a Home run from eciggity and ehpro.the vapor production is amazing and the flavor omg the flavor actually better than the v2.the airflow is perfect I leave wide open and still loads of flavor and deck size is nice I would still run 2.5 id if ur gonna try any crazy but building is a breeze on velocity deck and wicking is done in minutes w no leaking i found if you cut wicks and end of deck and just tuck in don't force I get no dry hits or leaking.But deffo a must have if you have nvr had a billow or even if you have the v2 a huge upgrade in convienience and in flavor,vapor production.
-
Love it
Great tank I love mine all I been using !!
-
Great RTA.
So after trying the Crius, Griffin ,Aromamizer and the Billow v3 I decided the Billow is my fav. Great build quality, easy to build on and wick , hold a decent amount of juice, like the functionality of the top fill , good price and like the way it hits. The Griffin is also a great rta but I liked the Billow so much i'm buying 2 more. Also Eciggty is now my go to online vendor good prices and great costumer service . Buy this RTA it's ****ing great.
