Image 1

Billow v3 RTA by EHPRO & Eciggity

×
×
Rating:
(60)
Price:
$24.99
Weight:
0.50 LBS
Shipping:
Calculated at checkout
Quantity:
Description
Reviews
Related Products
Product Videos
Warranty
Also Viewed
By Category
Other Details
  • Product Description

    The Billow v3 is a complete redesign of the Billow v2. We took in all the suggestions from the community to make the Billow v3 the best it can be! When designing the Billow v3, we primarily focused on airflow, flavor, and the convenience of filling and building. The adjustable cyclops airflow holes on the Billow v3 are larger to provide more airflow to your coils. We also implemented a center airflow design that provides slightly more airflow and hits the back side of your coils to bring out the flavor of your e-juice. Top filling is very convenient by simply pulling the top cap to access the fill port and closing it shut when you're done refilling. Juice flow control via turning of the top cap is available for those who want to restrict the amount of e-juice that is being wicked or to prevent oversaturation. Finally, the build deck is now a 2 post Velocity style deck allowing you to build perfectly centered coils every time!

    Features:

    • 23mm Diameter
    • 4.6ml Tank Capacity
    • 2mm Diameter Post Holes
    • 2 Post Velocity Style Deck
    • 2 Adjustable Bottom Cyclops Airflow Holes
    • Center Airflow
    • Top Fill
    • Juice Flow Control
    • PEEK Insulator
    • Rebuild & Rewick Without Emptying E-Juice


    Additional Glass Section for the Billow v3 can be purchased here: /billow-v3-billow-v3-plus-glass/

     

    For those who received replacement O-Rings for the Billow V3. Please replace the old O-Ring with the new O-ring to the section where the picture is shown. 

    20160601-155631.jpg

    Includes:

    1x Billow v3 RTA by EHPRO and Eciggity

    1x Delrin Drip Tip

    1x Extra Glass

    1x Japanese Cotton Pack

    1x Bag of O-Rings, Screws, Wire and Hex Tool


    Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.

    Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. We will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.

  • Product Reviews

    ×

    Write A Review

    1. Kayfun v5 on steroids

      Description says it all. Have a dozens of tanks including the K5 and this tank reminds me of a bigger badder version of it. Works flawlessly. on

    2. My tank

      My tank was deleiverd ok and works good the only thing was i try to find out om the shipping but the tank works good
      Thanks
      Jerry key
      on

    3. My tank

      My tank was deleiverd ok and works good the only thing was i try to find out om the shipping but the tank works good
      Thanks
      Jerry key
      on

    4. Works like a charm

      This tank gave me magic powers. I can now communicate telepathically with my dog and creatures of the forest. I can instantly disappear in a cloud of vapor to confound attackers and pesky meter maids.
      It has no leaks with the upgraded o rings and the top fill is super handy for filling with squeeze bottles or syringe. The build deck is most adequate for my meager coil spinning talents.
      I just ordered two more as spares.
      on

    5. My favorite rdta

      I use 4 or 5 of the most popular rebuildable tanks and the Billow v3 is easily the best as far as vapor production and flavor. It gave me a little grief finding the proper wicking method (fill to 80%, keep juice ports closed while filling, and resist repeatedly twisting the air and juice ports open and closed excessively), but once it's dialed in it can't be beat. on

    6. Leaky pos

      The top fill section is so hard to lift most times you feel somethings going to break.
      Screwed down all the way it wobbles and leaks where the deck meets. It did that out of the box.
      And of course tilted even the slightest it leaks out the air holes. Different wicking, changing o rings ect ect I've tried it all and same result.

      I expected better.
      on

    7. Not perfect but getting there.

      Honestly, great tank. Good flavor. Easy to Build. Im only gonna mention cons cuz there are too many pros

      Cons:
      Sharp screws! Even cut some of my 24ga.
      Absolutely terribly hard to get the deck off sometimes. Should be better gripping but there is almost none. (combat it by not overtightening)
      Tank does not breakdown all the way to clean it.

      Other than that the leakiness was fixed by the new orings.

      Great tank! Top fill is a breeze.
      on

    8. After further review

      I originally gave this tank a great review but after some time I'm thinking I may have jumped the gun on this. After some time owning two of these, there's some issues that I think really have hurt this tank. It weeps, and weeps, and weeps. Its fine for maybe a day or two after re-wicking but it continuously weeps juice from between the AFC and the JFC. O rings have been replaced on both of mine a number of times now, that only seems to help for a short period of time, week tops, then its back to the weeping or seeping daily, whatever you want to call it. Juice should not "leak" like this. I'm almost positive this has to do with the press fitting and inability to completely disassemble the base. I'm still a huge fan of the V2 and use them quite regularly. I think I will shelve the v3's indefinitely at this point. They are just too much of a messy hassle. on

    9. Great tank but...

      Kind of expected more after the impeccable v2. I know juice control is the new thing but I hate it. I've never thought to myself "well gee I wish less juice was wicking onto my coils" but apparently enough people have to make this something worth doing. I'd have no problem with it if it was less intrusive and i could just leave it open but these juice control decks have a LOT more moving parts that can (and do) break. Furthermore, the decks of the JFC RTA's are pressure fitted so there are places on the tank that you can't repair, trouble shoot, clean and/or inspect for dirt and IMHO that's unacceptable. Exhibit A: my negative post came loose and my Billow is rendered useless as i can't get into the deck without risking damaging it because I'm not sure how it's put together. I contacted ecigitty this morning and am awaiting reply. if they won't replace it, i plan on forcing it apart to get the screw and post locked in (if anyone knows how to effectively disassemble the deck please post pics online! ) on

    10. Great RTA

      This is the first RTA I've ever gotten that does not leak. on

  • Find Similar Products by Category

×
×