We had an overwhelming number of requests from our fellow vapers and so we made it happen. We bring you the Billow v2 Nano RTA! All of the features are identical to the Billow v2 RTA except its shorter and holds 3.2ml of e-liquid. The glass section still tapers out measuring 23mm in diameter and the base and the top cap of the Billow v2 Nano RTA are still 22mm in diameter allowing it to still sit flush on all of your 22mm mods!
- New barrel and groove exterior design with two piece chimney
- Rebuild and make adjustments to your wick and coils without dumping out your juice
- Deck is designed with cotton grooves for convenient wick placement
- No more screws to fill juice or adjust airflow
- Adjustable Airflow Ring
- Peek Insulator for low sub-ohm durability
- Bigger Airflow Hole on the Airflow Ring and Deck
- Wide Bore Delrin Base Drip Tip
- 3.2ml Capacity
Note: The Airflow Ring's resistance (how easily it turns) can be adjusted to your liking by slightly screwing in or screwing out the small screw under the Airflow Ring.
Coil Recommendation: We recommend building 2.5mm or smaller diameter coils for the Billow v2 Nano RTA.
Replacement Glass is available here: https://eciggity.com/billow-v2-nano-glass/
The Stainless Steel Section for the Billow v2 Nano can be purchased here: https://eciggity.com/billow-v2-nano-stainless-steel-tank/
1x Billow v2 Nano RTA by EHPRO and Eciggity
1x Wide Bore Delrin Drip Tip
1x Bag of O-Rings, Screws, and Screwdriver
Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.
Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. Eciggity will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.
37 Reviews Hide Reviews Show Reviews
The build deck is tiny, and I cant get it to not leak through the air slots. When it works, it does put out some pretty good flavor. All in all I believe it's just too much packaged into such a small space.
This tank is fantastic, plain and simple. Got the wicking right first try, running 27g SS coils and the flavor is on par with some of my rda’s. About to order a second.
My very first MTL RTA! I love it! So very pleased with it!
the tank it self is fine but the deck is a nightmere to build , tried several builds and just could not get past the way the post holes are staggered poorly thought out deck , I ended up just throwing it in the trash a complete waste of money
I tried 3 sets of micro coils problem with this is the build deck is made in such a way that when you get your coils in , they do not line up under the air holes , They need to rethink the build deck BIGTIME. I just thew this in the trash
I lost my regular sized Billow V2 and wanted the smaller "Nano" version. Absolutely love'em both. They are simple in design, don't leak, easy to build on, and fit perfectly on my SMPL mechanical mods, which IMO is the best setup because its a small package and works every time with no mess & no issues ever (2+years until I lost it). Got the v2 Nano Stainless Steel Sleeve to replace the glass one whenever I drop this beast.
Billow'so have always been good. No matter how they change them they always hold that smooth airflow and a thick juicy hit we all love. Hits just like a billow v2 does with a smaller package. Colors are nice too.
This is my first RTA. Before this, I was using an Aspire Nautilus, and it was a nice little lung-to-mouth tank, but this thing blows it out of the water. I use max vg or 100%vg base juices, which are very thick, but this tank wicks like a madman. So far, the only dry hits I've had are from chain vaping some of the thickest juice I had for several minutes, which kind of gave me a headache. I don't normally vape this way, but I wanted to see what the Billow's limits were. It turns out they are much higher than I need them to be. I don't run my mod too hot; I'm using a Coolfire IV, currently set to 33 watts with .6ohm coils, so YMMV. I have had 0 leaks after I got the wicks set into the tops of the juice channels properly, even carrying it around in my pocket. I don't have any previous experience with RTA's, but I bought this after finding several recommendations for max vg users online, and it works as well as the most glowing reviews said it would. I'll be buying one or two more in the future, so I can keep a few flavors on standby. Building wasn't too hard, thanks to an online tutorial by The Modified Vaper (highly recommended--the guy's a trip). This unit is easily worth every cent I paid.
I have been really enjoying this one, works great and fits my Tesla Stealth great. Really easy to build and top notch quality. If I have a thumbs down it would be that the blue color is not a match for any or my blue mods, other than that I recommend the Billow 2 Nano to anyone looking for a good quality RTA.