PLEASE NOTE THIS IS A CLEARANCE ITEM. THERE IS NO RETURN/REFUND ON THIS PRODUCT.
The Billow v3 is a complete redesign of the Billow v2. We took in all the suggestions from the community to make the Billow v3 the best it can be! When designing the Billow v3, we primarily focused on airflow, flavor, and the convenience of filling and building. The adjustable cyclops airflow holes on the Billow v3 are larger to provide more airflow to your coils. We also implemented a center airflow design that provides slightly more airflow and hits the back side of your coils to bring out the flavor of your e-juice. Top filling is very convenient by simply pulling the top cap to access the fill port and closing it shut when you're done refilling. Juice flow control via turning of the top cap is available for those who want to restrict the amount of e-juice that is being wicked or to prevent oversaturation. Finally, the build deck is now a 2 post Velocity style deck allowing you to build perfectly centered coils every time!
Features:
- 23mm Diameter
- 4.6ml Tank Capacity
- 2mm Diameter Post Holes
- 2 Post Velocity Style Deck
- 2 Adjustable Bottom Cyclops Airflow Holes
- Center Airflow
- Top Fill
- Juice Flow Control
- PEEK Insulator
- Rebuild & Rewick Without Emptying E-Juice
Additional Glass Section for the Billow v3 can be purchased here: /billow-v3-billow-v3-plus-glass/
Includes:
1x Billow v3 RTA by EHPRO and Eciggity
1x Delrin Drip Tip
1x Extra Glass
1x Japanese Cotton Pack
1x Bag of O-Rings, Screws, Wire and Hex Tool
Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.
Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. Eciggity will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.
63 Reviews Hide Reviews Show Reviews
-
Not bad at all
So I have always been a fan of the billow series and this tank is a great evolutionary addition. I'm not in love with the fill method. On of the oring, I'm assuming one I can't see, was already seemingly ripping off with the top fill. This happened when I was just looking it over and testing it out before building it. It has seemed to affect anything. I don't love this filling method. Additionally my juice control is extremely loose and spins far too easily. I've had a few dry hits not noticing the juice flow closed while in my pocket. I had this problem with my first Griffin too. My second Griffin is nice and tight. Flavor and vapor are awesome. Overall a real solid tank. I do like the wicking better than having the dumb ring. If put up against the Griffin it's a tough call. The Griffin may win by a smidge but both are super solid and I highly recommend the billow v3.
-
A Billow Fan
A Billow fan that isn't impressed with the V3. There seems to be a fundamental problem with the poor quality orings. I don't get leakage due to wicking out of the airholes, but I'm constantly getting "weepage" out of the the gap between the bottom deck and tank. Also get weepage out of the top fill oring. Of course I've replaced them all to no avail. I feel like I'm wiping the thing more than enjoying it. Would not purchase again. I feel like if EHPro redesigned the orings things would work properly.
-
Billow v3
Supper nice RTA no leaking easy to build on. Performs well. Love it,
-
A really great little tank
I love this Tank. It is easy to fill and highly adjustable for juice consumption and air flow.It does not leak like mu Smok TFV4 does. A superior tank in just about every aspect - well machined , parts fit together well. Has a great draw and produces nice clouds. In fact I may just buy another
-
Billow
I loved billow serie.I have all.I wait now billow 3 25mm.for me is the best.thanks Eciggity and EHPRO.Really good product.when you finish 25mm send me email.thanks
-
Great RTA Great Price Awesome Shipping
Wish I would've known about the 25mm version coming out but anyway... This tank has amazing flavor once you find your build. I prefer a 2.4/2.5mm sized coil using 24AWG wrapped 6 times. This thing is almost impossible to wick wrong. Beautiful durable finish (I have the black) with no leaking issues at all
-
Billow v3
Nice improvements on the v3. Top fill works very well. Don't over fill or it will spit it back. My only gripe is that your Web site should have informed the consumer that a 25mm version was being released. I would strongly recommend Ehpro and Eciggity to make this known in future versions to those of us that support your brand.
-
GO TO RTA
Unless someone comes out with an RTA that is ground breaking I have found the only RTA I need. Plenty of build space, simple to wick properly, super easy to fill, and stellar flavor and vapor production. The black Billow v3 I have also looks awesome with my green DotMod drip tip. I could not be happier with this RTA.
-
Stick with the V2 or get a Mutank
The first thing you'll notice upon unboxing is that the construction is sturdy and appears as well put together as the V1 and V2. The deck is very spacious, and the juice holes appear large (more on this in a bit). It was a pleasure to build, but after reassembly, the fun ends. Even after ensuring the O-rings were secure and in place, and ensuring adequate pressure on each screw joint, it leaks slowly from the top line where the expanding fill port expands from. The bottom where the juice channel control is also leaks slowly. This happened with 80, 75, and 70 VG juices. Referring again to the juice holes, I tried wicking them where the cotton came all the way down, half way down, and where the wick was barely inserted. I tried this with thickly and thinly bunched cotton and Rayon. No luck, and more importantly, no flavor or worse still, dry hits. Filling it is messy, despite the apparent convenience. Even if you wipe down the metal ring surrounding the inside of the fill port, and fill extremely carefully, juice will accumulate in that space and when you collapse it, juice runs from the entire circumference. At this point, with a messy, flavorless, burnt disaster before me, I gave up. I tried both dual and single coil builds, twisted captions, fused captions, twisted coils, and standard 24 gauge coils. I'm using the Mutank RDTA now, with the velocity deck, and it's infinitely better. That's my recommendation.
