PLEASE NOTE THIS IS A CLEARANCE ITEM. THERE IS NO RETURN/REFUND ON THIS PRODUCT.
The Billow v3 Plus is the 25mm version of the Billow v3 and retains all the same great features with a some minor adjustments. With the Billow v3 Plus being 2mm larger in diameter, we were able to slightly increase its tank capacity and the overall size of the build deck. In addition, the diameter of the quad wicking holes and all airflow holes on the deck have been increased as well since larger and more intricate coils would be used to make optimal use of the larger build deck.
Features:
- 25mm Diameter
- 5.4ml Tank Capacity
- 2 Post Velocity Style Deck
- 18mm Diameter Build Deck
- 2.5mm Diameter Post Holes
- PEEK Insulator
- 4.5mm Diameter Airflow Holes
- Quad 4mm Diameter Wick Holes
- 2 Adjustable Bottom Cyclops Airflow Holes
- Top Fill
- Juice Flow Control
- Wide Bore Delrin Drip Tip
- Rebuild & Rewick Without Emptying E-Juice
Additional Glass Section for the Billow v3 Plus can be purchased here: /billow-v3-billow-v3-plus-glass/
Includes:
1x Billow v3 Plus RTA by EHPRO and Eciggity
1x Wide Bore Delrin Drip Tip
1x 510 Drip Tip Adaptor
1x Extra Glass
1x Japanese Cotton Pack
1x Bag of O-Rings, Screws, Wire and Hex Tool
Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.
Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. Eciggity will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.
83 Reviews Hide Reviews Show Reviews
-
They still haven't fixed the seeping problem
This is my third one. All of them seep right above the air flow ring. The two previous ones I returned for a refund. The only reason why I bought this was because it was on sale for $11. It is a great vape but it is flawed. No way do I buy this at full price. And I take it off the mod when not in use. The replacement o rings they send you look just like the one that comes with the unit and do not fix the problem. To summarize, value for the selling price($11) yes, worth it. I knew I was buying a flawed design. Value at full price, no way.
-
Progression
I went from eVod clearomizers to sub-ohm tanks to Aromamizers; I thought I'd found the holy grail. Then I tried GeekVape Griffin tanks and I was hooked. Until the 25-Plus came out and leak city; totally unusable. The Billow V3 Plus blows all else away. Easier to coil and wick, especially wick, than the Geekvape Griffin, it also has better flavor. And the clouds! And it doesn't leak! I bought three, and have refilled each over five times now. The outside remains dry as a bone; I love it. All my Griffins leak, especially the 25-Plus, and I've got more than a dozen. This tank, so far, has only two minor cons: 1. the grub screws tend to snap-off coil legs, so be aware, and 2. it guzzles juice for fun. Did I mention clouds? 24 ga.—12-wrap, dual coils, 0.16 ohm—NiFe48 (Alloy 52) wire; organic cotton wicks; 100% TC. DIY eJuice.
-
Ecigity Is wonderful !
Eciggity had the billow v-3 plus on sale and i bought two of them, I hope they run the sale again i will buy two more ! They are great unit's, easy to build and what can i say, eciggity is top notch. God Bless Alvin. H Brunswick, Ohio
-
Zero leaking, easy build but a few small quirks
Overall, I'm very pleased with this tank. Absolutely zero leaking, and I did not have to install the extra o-rings included by Eciggity. Using it as-is, right out of the box, and have not had a single drop leak out. Building is very straightforward. Cons are small -- the top fill sleeve can be hard to pull up, and the fill hole could be a bit larger for thick juices. Flavor is good but not stellar. But, all things considered, I'm very pleased with the purchase.
-
I can see why they're selling these so cheap...
It wont fire because the 510 wont reach any of my mods... Unscrew to extend and center post, and becomes to loose... Waste of money...
-
Love my Billow v3 plus
This tank has the smoothest airflow wide open or turned down. It never becomes turbulent. I think people don't understand that if your cotton is touching the airflow under the coil on any RTA it seeps down and leaks. You need to make sure of that on any RTA. I've retired all my Griffins for this and the serpent mini. This tank never leaked and everything threads and assembles perfectly.
-
Great tank
I had to go to YouTube because it was my first one that you had to build the wick etc....it does not leak , It did only due to like the last review did not wick it right. Its a great tank for the price and all of the YouTube reviews agree.
-
Does NOT leak & does dismantle to clean
I was reading reviews and a lot of people think it leaks, well it will just like any other tank if it's not wicked right!!! And some of you think it does not come apart to clean, if this really was the case they would not send a spare glass. So it does! And it doesn't leak! It is the best tank that has come out in last 6 years!
-
Billow v3 plus movement in the right way
The only gripe about this device is that it leaks and could in time damage or kill off your mod or device, replaced o rings and it still leaks out the AFC and out the bottom of the AFC onto the mod. Other wise it is so easy to build on, so much room to work with on the deck. Good flavor and awesome cloud production. Unfortunately mine sits on a stand as I try to figure out how to stop it from leaking. Might try a small amount of plumbing tape.
