*The Titanium and Nickel CL Heads are not Rebuildable*
The CLR Atomizer Head is a newly designed atomizer head made for the eGo One. Compared to the traditional eGo One CL atomizer heads, the "R" stands for Reusable, Rewickable and Rebuildable. The CLR features a unique body design, allowing users to conveniently replace the cotton and customize the coil resistance to their preference. Organic cotton is used for wicking material of the CLR, which provides robust flavor output.
Rewickable Cotton:The CLR Atomizer Head comes pre-built with organic cotton. The cotton can easily be replaced as needed.
Rebuildable and Reuseable:The CLR Atomizer Head is a unique type of RBA. For advanced users, the CLR Atomizer Head can easily be taken apart, so that a new coil can be installed with ease. For standard users, the CLR Atomizer Head can easily be reused when the coils accumulate buildup. Simply remove the cotton, dry burn the coils, let it cool, and then run the coil under cold water. After the coil is dry, new cotton can now be applied to the coil for use.
Liquid Value Control:The Liquid Valve Control can be adjusted according to the PG/VG percentage of the e-juice and voltage output of the battery.
Replacement Coils for the Joyetech eGo One/Mini/Mega Atomizer.
This is my second set of 5, after I accidentally threw away the latter 4 of the first 5-pack I bought because I thoughtlessly put it back in the shipping container.
The first I had lasted a very long time, and I only had to replace it when I tore one of the gaskets using the wrong gauge wire in it and it started leaking down the base.
My only complaint, which may not have anything to do with this product, is that when I switched to the Aspire Pegasus Box Mod, for the first few days of use I was getting very inconsistent results; on one draw the 1 W output would burn the wick, and on the next nothing short of 8 W would do anything. Not sure which of the two products was at fault there, but either way, after changing the wick out a few times, I've had no further issues.Erik Whittiker
Good clouds, easy to replace cotton and coils. I prefer these over the ones that come with the original setup.Jordan
I arrived on time. bue a product meets specificationsUnknown
replaced my kanger mini
I bought this ego one mega tank the other day and it amazed me great flavor the titanium coils are great put this tank on my invader mini black on black and man a world of a difference between the kanger ni200 they need to make ti coil for kanger because the horizontal coil are junk I've heard the ni200 verticle are decent but I'll be the judge of the kanger almost made me give up on temp control til I bought the ego megaUnknown
Nice coil, really good flavor.
As my title says these eGo One CLR coils are really really nice coils, the flavor is great, no complaints. Although, when I first set this coil in its holder and then filled my tank put it all together and hit the fire button. Only to have such a burnt taste in y mouth and throat, I had to look...my eVic VT was set at 332 or 35 watts, something that was way to high. I like to ape certain tanks at certain voltages and/or wattages. Usually, I like to Vape around 4.2 volts 33.5 or 35.3 watts on a lot of. Y tanks. Some, like my Atlantis and the 1.0 ohm coil I have at 5.7-6.0 volts with the wattage reflected.
That said, I do like the CLR coils it will remain to b seen as to how long these coils I'll last. I am interested to see how well the "rebuild able" part of this is. Looks easy, but then again, easy is relative, how well it will function after it has been rewicked will be the test. After that, then comes the rebuilding part of it, what gauge Kanthal does one use? I'm think around 28 gauge should be ideal. We shall see, I will return and edit this post after first rewicking, and then once I have built a new coil for it. Thank you all for taking the time to read my review, it is much appreciated. Mark T.
These improve the tank so much! An unusable ego one mega on my evic vt is now in my rotation thanks to these!
So, these are leaps and bounds ahead of the stock coils for the ego one mega. I can finally use my tank! VapinDave
It ok..i get a burned hit as compared to the stock coil that came with the ego one
I was so amped...to get the rba, but when i put it on the ego one tank..i got a burned hit quick. Ill prob try another one since it came with 5, but im not a fan of the burned hits.Pat from Chicago
I give it A plus
Very easy to work on it and it works real goodortiz1125
Great Design - Kind of small though
i picked these up after purchasing a joyetech evic vt. i was using the nickel and titanium coils but wanted a rebuildable option.
comes apart so you dont have to mess with fishing the coil through the top or small opening
cool design for rba section
easy to wick and coil
really small, smallest rba i've ever built on
the top hat of the head got stuck in the chimney section when i went to refill it
still i would definitely recommend to anyone that has a compatible deviceUnknown
The perfect companion
I am new to the vapor scene, but I have done the research. This is not for the cloud makers. This is for the puffer that wants a good respectable volume with the quality and perfect travel companion. It is simple yet the quality is there. For me, it is a great choice for travel and everyday use. It is suttle, compact, and can take the beating. It is what they advertise. good for the beginner and anyone that wants a good quality vaping experience. get a pack of the rebuildable heads and you've got it all.King