The Velocity V2 RDA Clone By Tobeco retains many of the same great features as the original Velocity RDA Clone with some additional features and improvements. The Velocity V2 Clone is 3mm shorter than the original Velocity Clone with a smaller chamber that greatly increases flavor. In addition, the top cap is thicker to reduce heat transfer and now has cap alignment registration marks which makes it easier to align the top cap and base. Furthermore, the post holes are larger with more efficient indirect airhole placements to optimize larger coil configurations. Lastly, a convertible bottom feeding pin has been implemented to make the Velocity V2 Clone compatible with squonk mods.
Please Note: The bottom feeding screw plug is preinstalled and should be removed using the included 0.9mm hex key for squonk mod compatibility.
Features and Specifications:
304 Grade Stainless Steel
5.5mm Deep Juice Well
3mm Shorter Profile
Thicker Top Cap
Cap Alignment Registration Marks
Top Cap Locking Tab
Convertible Bottom Feeding Pin (Compatible With Squonk Mods)
Two Post Design
Thicker Negative/Positive Posts
Larger Post Holes
More Efficient Indirect Airhole Placement
Dual Adjustable 2mm by 8mm Horizontal Slots
Six Adjustable 2mm Indirect Airholes
Delrin 12mm Widebore Drip Tip
Delrin 510 Drip Tip Adaptor
1x Velocity V2 RDA Clone By Tobeco
1x Delrin 12mm Widebore Drip TIp
1x Delrin 510 Drip Tip Adaptor
1x Bottom Feeding Pin
2x Bottom Feeding Screw Plug (1x Preinstalled)
1x Standard 510 Pin
4x Hex Screws (Pre-Installed 1.5mm Hex Key)
4x Flat Head Screws
4x Philips Head Screws
2x Hex Keys (0.9mm And 1.5mm)
Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.
Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. We will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.
Flavor or clouds, it's great for both. Comes with an assortment of screws (the hex screws strip somewhat easily) and other goodies. I had the Gunmetal and decided to order a black to match my mod. I ordered on a Wednesday morning (in the Midwest) and received my V2 on Saturday! Speedy service, and an awesome product. My only complaint is the weak and small o-ringsAlex
Just like the v1 with a small twist
The only reason I bought this was for nostalgia reasons and to relive the feeling I got when I purchased my first vape, an Istick 100W paired with the original velocity. Let me just say the Velocity is still going strong and will probably always be one of the best RDA's out there. With the revolutionary post design that changed the vape game forever, you can't go wrong with this. As far as performance goes it acts just like the original with some small tweaks. I've noticed a slight bump in flavor and a tad bit thicker clouds than I'd get with the same build in the original. Perfect RDA and you can't go wrong getting it. I know it's a clone but it performs, looks, and acts just like the real deal. And the squonking capability is certainly a nice touch. Packaging also includes extra goodies per usual.Andrew
Nice little RDA
Not bad for a clone.. Had a little issue with the 510 pin alignment on my 1st order of this RDA, but eciggity with their awesome customer service took care of that.
Big clouds with great flavor, easy to build upon, and wick. Machining is top notch overall. Happy that I bought this RDA. Have it sitting upon a Reuleaux RX200s, and all is well!Joey R.
Works great on my KangerTech dripbox 160
This was my first stand-alone RDA that I purchased. This is might be why it took me awhile to get it to work. I did have to play with the adjustment screw at the bottom and tighten it down with a pair of pliers but once I got it it works better than I ever imagined I will never take it off.Richard Pence
Wanted a cheap dripper. Turned out good!
I just wanted a cheap side airflow dripper to try. I have the fishbone RDA as my very first ine but i discovered that while it looks really neat with the glass cap, the bottom airflow leaves something to be desired. When i got this one in the mail, coiled it up and wicked it, i was immediatly happy with the first vape. Using my usual dual 7 wrap SS316L clapton coming in at .22ohms the flavor is phenomenal and made it my all day at home vape. I saw why people kept saying that dripping gives the most satisfying vape. The airflow on the sides is great for fine tuning the flow to how you want, giving a wide range of options from all the way open to fairly restricted. The only issue i take with it is that it gets pretty hot, this is probably more of a thernodynamics thing with heating up metal but compared to my fishbone with the glass cap, there's definetly a difference. I highly suggest this if you're trying to find a non-intimidating way to get into RDA or DIYing.Matthew T Belanger
My first drpper
This is the first time I have used a dripper and I really like this one, easy to build and fill. Barbara Lorenzo
Top notch clone/fast shipping
Great quality all around. Love the Philips and flat head screws for the posts. Shipping was on time and package in good shape. The only thing I would have liked would have been a glass top I've seen offered by other companies. Erick
Wanted an original, but they're hard to find and expensive. Did lots of research and decided to go with this Tobeco Clone.
It's identical to my friend's original Velocity v2 at a fraction of the price. Very easy to build on. Nice big holes in the posts for exotic coils. Extra grub screws and o-rings included, as well as a genius center pin able to be used for sqonking.
Very happy with this clone, and wouldn't hesitate to order again. Nate
great rda for the buck
nothing wrong with it hate the top air flow but overall its a great little rda for cheap Unknown
As always Eciggity keeps great prices and shipping. Tobeco Velocity is well machined. Eciggity also added 4 slotted grubs and 4 phillips grubs, nice touch.Robert W.