Excellent airflow, easy to build, and no leaks! Only thing I don't love is the fill method. Otherwise, it's the closest you'll get to dripping with a tank.
Posted by Don K. on Nov 07, 2016
First off I have the 30mm version but they're the same exact tank other than size. I really like the tank but I do have a couple of issues with it. Inside/side fill just plain sucks for me. Would much rather they stuck to the top fill method. Other than to just be different I can't see a reason for it. And the inside chamber is way too small. For a 30mm tank you should be able to get some pretty big builds on here but you can't because the coils will hit the chamber walls. I love the build deck and it's nice and large but the extra space is pretty much useless. Other than these two cons I think its a nice tank and works very nice for me so far. Just don't plan on using big coils and you'll be fine.
The most dripper-like RTA yet
Posted by DrBlazer on Sep 05, 2016
Without a doubt, this is the most dripper-like RTA yet. This RTA reassured me that waiting at least a couple weeks before writing a review is necessary. I didn't like it that much at first. Possibly because I tried the TFMT the same day and didn't like it at all. So, about a day after I first got this I immediately went back to using a Mage (it was my second Mage because my first one had leaking problems after I dropped it). A few days I dropped my mid with the Made on it and it started to leak pretty badly just like the first one I bought. So, I decided to give this go another chance. I'm glad I did. This thing pulls huge clouds and has good flavor. Now, I love it. My only complaints with this are the airflow control liquid inlet. The airflow control ring has absolutely no resistance, and I'm mean absolutely no resistance, so you'll constantly have to readjust the airflow. Refilling juice could be a lot better. I simply refill it by separating the build deck/base with the tank. I wish it had a 510 drip tip adaptor or was just a little bit more narrow. That being said, I will be buying one of the new 30mm versions very soon. I just wish the prices were a little lower.
Always like vaperz cloud products
Posted by Mike on Aug 14, 2016
But.. this vcst honestly has me a little disappointed. O rings are really loose. Tank spins off too easy. Tried to tighten it with floss n it gets too tight n hard to fit. Afc ring same thing. Wish the tank would lock when it spins instead of continuous spins. Feels like it could easily spin off n spill in my pocket. One of the air tubes was wobbling when I touched it. Also there was a tiny metal bar sitting at the bottom of the box when I opened it n I have no idea if it fell out of something or if it's machining reminance. Other than that it hits great just worried about being out n about with it. Hope this helps orhers decide. By the way I love my 30mm VCMT. This VSTC doesn't seem like it passed the same quality standards.
Always like vaperz cloud products
Posted by Mike on Aug 13, 2016
But.. this vcst honestly has me a little disappointed. O rings are really loose. Tank spins off eaay. Tried to tighten it with floss n it gets too tight n hard to fit. Afc ring same thing. Wish it would lock when it spins instead of continuous spins. Feels like it could easily spin off in my pocket. Other than that it hits great just worried about being out n about with it. Hope this helps orhers
Dripping with a tank!
Posted by Unknown on Aug 09, 2016
I've been strictly a dripper for two of three years I've vaped. No tanks really seemed appealing to me because of tapered chimneys and tedious wicking. I saw this chimney had no taper to restrict airflow as well as wicking just like a dripper, and I had to have it. It gives me good clouds and flavor, 3mm coils will fit just have to build close to the posts. Great tank. For the 3 star guy, it's only supposed to have 1 pin, and the airflow control spins one way than back the other. Nothing's wrong or missing. Great tank especially if you've been hesitant to grab one after hearing about leaky tanks, or difficult wicking.
Top Innovation Of The Year!!!!
Posted by Unknown on Aug 08, 2016
This has replaced all my other RTA's by FAR!!! Best of the BEST!!!!! It takes 0.5 seconds to take the tank section off to expose the build deck and thats also how i fill it which takes a couple seconds. NEVER FILL FROM TOP!!!!!! its pointless to fill that way and why would u considering how easy it is to fill once u pull off the tank section and fill through one of the wicking holes. Plus you get the tank COMPLETELY FULL this way!!!! ANYWAY i love my silver and black one and i have a 30mm on its way and i see they just came out with a 36mm and also some kickass new colours for the 25mm version. I haven't had any problems with mine and someone complained about there only being 1 pin for the air control ring. Theres only SUPOST TO BE 1 PIN lol. Anyway it's worth every penny and you will NOT be disappointed!!!! Flavour is truly AMAZING! Puts my Griffin 25 to shame as well as my TFV8 with RBA.
Not all that great.
Posted by Unknown on Aug 01, 2016
I think I will think twice before buying another "vapors cloud" product. The design is not all that bad in terms of flavor and vapor production, machining is quite poor. Filling is a bit a pain. Airflow would jam if turned to far. By design it appears there are suppose to be 2 pins to stop the control ring to full open and full close. Mine had only 1 and the replacement that was given only had 1 and also jammed. Money would be far better spent on some of the cheaper rta's that eciggity has. Their customer service is top notch. Unfortunately this tank was a big let down.
The VCST by Vaperz Cloud is a 25mm RTA that features a Two Post Tsunami Style deck with plenty of build space to bring out the flavor of any build you plan to use in it. The main feature that sets the VCST apart from any other RTA is its unique top fill design. A fill port is visible at the top of the chimney and is sealed by an o-ring fitted delrin drip tip that extends below the fill port when fully seated. Filling the VCST is done simply by closing the juice flow control, removing the drip tip and accessing the fill port through the inner chimney.
Stainless Steel Construction
Unique Top Fill Design
Accessible By Removing Delrin Drip Tip
Sealed By O-Ring Fitted Delrin Drip Tip
Pyrex Glass Tank
4ml Tank Capacity
Two Post Tsunami Style Deck
Large Post Holes
Quad Kennedy Style Airflow Tubes
Juice Flow Control
Adjustable Dual Bottom Airflow Holes
Build Deck Accessible Without Emptying Tank
1x VCST by Vaperz Cloud
1x Spare Glass Tank
1x Spare O-Rings, Screws, Hex Tool
1x Vape Band
Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.
Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. Eciggity will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.