Collaboratively designed by Youtube Reviewer Tony B. and Vandy Vape, the Pulse 24 Bottom Feeding RDA features a gold plated postless deck designed for squonking devices and is compatible with single and dual coil configurations. The Pulse 24 features two groove cutouts along the walls of the deck which function as a locking mechanism for the top cap as well as a marker to help align your coil with the airflow tubes. Designed for squonking devices, the Pulse 24 utilizes a bottom feeding squonking pin with a centralized juice splitter which evenly distributes e-juice into the two 7mm deep juice wells for balanced wicking. In addition, the tubular angled top airflow design is fully adjustable by rotating the top half of the top cap and prevents e-juice from leaking out of the airflow holes.
Coil Installation Tip: Use the included Ultem Drip Tip to determine coil lead length. Hold the coil next to the Ultem Drip Tip and make sure the top of the drip tip and coil are even. Cut coil leads slightly longer (~1mm) than the overall height of the drip tip.
Please Note: The 510 pin should be screwed into the bottom feeding squonking pin when the squonking feature is not used. This allows the 510 pin to be adjustable.
- 24mm Diameter
- Superior Stainless Steel Construction
- Lower Profile Design Than Pulse 22 BF RDA
- More Flavor Production
- Postless Build Deck
- Designed For Single & Dual Coil Configurations
- Quad 2.8mm Terminals With Side Tension Via Phillips Screws
- PEEK Insulator
- 7mm Deep Juice Wells
- Bottom Feeding E-Juice Splitter
- Top Cap Locking Mechanism
- Coil Aligning Marker
- Gold Plated Deck
- Adjustable Angled Tubular Top Airflow
- 3mm Diameter Airflow Holes
- Anti-Leak Design
- 810 ULTEM Drip Tip
- 17.5mm Outer Bore
- 810 Delrin Drip Tip
- 16mm Outer Bore
- 510 Drip Tip Compatible
- Gold Plated Squonking & 510 Pin
1x Pulse 24 BF RDA by Vandy Vape
1x 810 ULTEM Drip Tip
1x 810 Delrin Drip Tip
1x 510 Drip Tip Adaptor
1x Bottom Feeding Squonking Pin
1x 510 Pin
1x Bag Of Spare Parts
Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.
Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. Eciggity will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.