Great working and looking mod. Don't really have a lot to say about it but it works great.
PERFECTION in Your Hand
Posted by eandrews53 on Aug 02, 2017
We are now using six (6) of these wonderful mods on a daily basis. The fit and finish is perfect. The quality materials used in the construction guarantees these ergonomically pleasant mods will look as good as new for quite a while to come. Our oldest was purchased on a pre-order months ago, used EVERY day and it is as fresh as the day it came out of the box. We don't do temperature limiting (guessing) so I can't speak to that aspect but in wattage mode.....bliss, simply blissful. We love the way it fits in the hand, the firing mechanism is smooth and flawless, the weight is perfect, the screen is easy to read and full of useful information. I just can't say enough good things about this mod. For us it's perfection and we highly recommend to everyone.
Posted by Jin on Jul 24, 2017
Ordered on july 1st, started autofiring on july 24th, disassembled, cleaned and put an o-ring under the 510 connector. So fixed for now but I wouldn't recommend
The Predator 228 by Sinuous Designs & Wismec is powered by dual high amp 18650 batteries with a maximum power output of 228W. It features full temperature control functionality, a large OLED screen, side firing button, and 2A charging capability. With its built in reverse charging feature, the Predator can function as a power bank to charge other electronic devices by utilizing an RC adaptor.
Dimensions: 43.6mm by 29mm by 86.7mm
Powered By Two High Amp 18650 Batteries (Sold Separately)
Modes: VW / TC-Ni / TC-Ti / TC-SS / TCR
Temperature Range: 100°C - 315°C / 200°F - 600°F
Wattage Range: 1W - 228W
VW Resistance Range: 0.1Ω - 3.5Ω
TC Resistance Range: 0.05Ω - 1.5Ω
Voltage Range: 0.5V - 9V
Maximum Current Output: 50A
Maximum Charging Current: 2A
Spring Loaded 510 Contact Pin
Side Firing Button
Locking Switch Under Mod
Large OLED Screen
1x Predator 228 Mod
1x QC USB Cable
1x User Manual
1x Warning Card
Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.
Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. We will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.