<<<<<<< HEAD <<<<<<< HEAD ======= >>>>>>> 42a94ccd... CRO-97: Storefront admin bar ======= >>>>>>> 9f4433ac... STENCIL-3672 - Upgrade dependencies

Orchid v4 Clone by Tobeco

$14.99 $9.00
(You save $5.99)
(19 reviews) Write a Review
0.20 LBS
Calculated at Checkout

19 Reviews Hide Reviews Show Reviews

  • 1

    Posted by CK on Dec 05, 2017

    I believe I may have received a faulty tank. I had another Orchid V4 which I lost so I ordered this one. I had no problems with my old one after initial leaks, this one I cannot get it to work and I tried probably for three days straight now. I am 90% confident I have a faulty product :/ Stay away from this one.

  • 4
    Excellent piece of hardware. Well worth the price.

    Posted by Chris on Oct 03, 2015

    Its taken me a couple of weeks to get down the wicking as such that it doesnt leak or flood but once you get it, it's a great rta. Flavor is on point, not quite the drip flavor experience but as for something that you might take along on an outing of sorts, damn good piece. Cloud production is rather nice at around 30-40 watts with a dual 28g twisted kanthal 6/5 build coming out at 0.32 ohms. Havent tried other guages yet as this was the first thing I tried and instantly loved it, haha. Juice capacity is not quite as spectacular as you would like (definitelhy not a Billow V2) but its good enough, especially for a less vaped flavor in your rotation, (if you're like me and rotate throughout the day). Does tend to leak through airholes after filling every time i refill and slap it back on my box, despite wicking methods, but only a little. Machining is smooth, nice even threads. A lot nicer than I had expected. All in all, I do reccomend this RTA, def a good starter rebuildable or a nice addition to any vapers collection.

  • 4
    solid little juice eater

    Posted by jon. b on Feb 19, 2015

    As long as you wick this little juice whore right it performs very well. I run a .5 ohm 26 gauge dual coil at 30 watts and it cranks flavor and vapor. Seems to be interchangeable with all my kayfun gear except the chimney of course. I'm happy with it.

  • 5
    Top notch!!

    Posted by Bibi J. on Dec 09, 2014

    It´s solid, it´s sexy, it´s easy to build on, it serves its purpuse, gives flavor, gives good clouds, it´s practical, I really liked it, since I took it out of its box fell in love with it, I´m very happy with it and also with Eciggity! service, thanks guys, I do recomend this product.. doesn´t leak if you wick it correctly.

  • 4
    Pretty solid clone

    Posted by Cam on Dec 09, 2014

    The o-rings aren't quite the right size for the parts they go on, but there's no leaking, so I can't really complain too much. I wish, so much, that there was a more durable and pocket-able option for the center tank ring. Seems like almost every juice is a tank cracker, so the PC plastic is a waste of space, IMO. Quartz kits will fit, but block the fill hole and come apart in your pocket anyways. Instead of these, I just got a spare metal center ring for a Kayfun 3.1. Can't see my juice, but can pocket it, knock it around, and put any juice in it. Worth the trade-off, I think.

    Aside from that small gripe, the thing vapes well. Surprisingly good airflow and flavor. I normally vape a Plume Veil fully-open and the airflow is about half that, but the flavor is great. It's pretty easy to build on. You don't need to go crazy to make this thing perform. I have a plain, 0.57 ohm, 28ga dual coil (6 wraps on 3/32 bit) setup on a mech mod and it's great.

  • 4
    Leakage, fantastic air flow / clouds

    Posted by Soal on Dec 07, 2014

    It leakes a lot, all of the fluid... I think the leakage might be my bad. It came in fantastic time. It makes fantastic clouds and taste wonderful. Easy to understand and to build on. Vape on.

  • 5
    Best RTA I've ever used

    Posted by DoucheAsaurus on Dec 02, 2014

    This thing is awesome. It blows my kayfun out of the water. You can run it at pretty much any resistance you want and get great performance. I'm using 24 gauge micro coils wrapped 6-7 times around a 2mm screwdriver. Mine is at .28ohm and it's a very satisfying vape for me.

    I've been using it for a while now, and I have some tips for anyone who's picking one up.

    Wicking: Don't use too much cotton. You want just enough to cover the tops of the juice channels and not get in the way of the air holes. If your wick gets too close to the air hole it will leak like a sieve. Don't stick cotton down the juice channels. I don't do it personally and it never leaks and I never get a dry hit. I use japanese cotton in mine and it works and tastes great.

    I don't carry a syringe around so...Steps for top filling with minimal leaking:

    1. Take the top cap off and cover the holes with your fingers.
    2. Fill with juice and screw the top cap on about halfway.
    3. Turn upside down and wait for the air bubble to rise to the deck.
    4. Take your fingers off the air holes and screw the top cap the rest of the way on while still upside down.
    5. Turn right side up and blow through it a couple times to clear the airways of any juice that may have gotten in there. If you do this right there shouldn't be much at all.

  • 4
    not enough juice capacity

    Posted by Unknown on Nov 24, 2014

    The airflow was OK on his tank, build was a little difficult, but not insane.

    It is hard to fill, and when you do fill it, it only holds 2.5 to 3 MLS not 4-5 like advertised.

    Overall, not the best rta on the market, but still a good one.

  • 5
    Great performing RTA, little bit of a learning curve though

    Posted by Brian T. on Nov 24, 2014

    Much like the Kayfuns and Russians and even the aqua, the Orchid needs to be wicked properly for it to truly perform well. I use a lot of 70/30 and Max VG juices so I needed to learn fast. cutting the wicks on an angle seems to work well because you can more easily vary how much cotton gets in the juice wicks.

    the device itself is nice. 510 pin is "adjustable" but gets loose once you start opening it up. Machining is pretty good, threads go together fine. Deck is nice to work on and just big enough to fit smaller macro coils (although i don't recommend it)

    The only downside is the plastic tank, but the authentic seems to suffer from this too so it's not really a huge downside.


The Orchid v4 Clone by Tobeco features a much bigger capacity for juice(about 4-5ml). It has a bigger chimney/deck area for easier building and it features the same deck style with 4 posts as well as larger airflow holes. It still has the bottom filling screw on the bottom.


1x Orchid v4 Clone by Tobeco

1x Drip Tip

1x Bag of Wick, Screw, O-Ring, Allen Key, Allen Screw

Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.

Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. Eciggity will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.