PLEASE NOTE THIS IS A CLEARANCE ITEM. THERE IS NO RETURN/REFUND ON THIS PRODUCT.
The Omerta RDA Clone by Tobeco has an innovative design with features that are not found in many RDAs. This RDA has a unique airflow sleeve that gives the user the option for a tight draw or an airy draw depending on their liking. The snorkel airflow has slots along the top of the cap, which draws air downward to the cyclops holes and into the chamber, boosting flavor and throat hit. The sleeve of the Omerta RDA Clone by Tobeco also includes the standard cyclops airflow holes that can be run in either a dual coil or single coil configuration.
1x Omerta RDA Clone by Tobeco
1x Coil Tool
1x Bag of O-Rings, Extra Insulator, Screws and Screwdriver
Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.
Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. We will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.
This is a great little flavor atty. The deck is a little cramped and you have to learn how to build it right but once you do it has decent vapor output despite a tight draw and good flavor. Overall a real surprise gemSandy Phillips
and i thought the origen was a difficult build
So the machining of this atty is top notch, not a single flaw and clean as a whistle out of the box (still cleaned it). I may have built this too low using 2 coils w/ 7 wraps of 24 guage but after building 5 other coils i resorted to what worked for my tobh. At first i tried to position a 3mm 22 guage single coil like a lemo but i overestimated the size of the chamber. Then i went for 8 wraps of 26 guage in vertical coil but didnt like my options for wicking. So broke down and went for a boring horizontal build for the dual coils. I dont know if i've reached the limit of this atty's potential but the first few puffs blew me away with flavor. Iam thinking it has to do with that rediculously small/domed chamber but the flavor of my juice comes through so clearly that its almost like drinking it straight from the bottle (dont recommend). So iam impressed. I like how its a challenge and i've experienced some of the great flavor it can provide, but i had to take off a star for how annoying it is to build. While i havent built a veritas i am sure that is easy by comparison.Peter
Really nice clone, well built. The tolerances of the o-rings are perfect. A little tricky to build on, but if you have experience building RDA's, you won't have a problem. Must say that the flavor I get from this is some of the best I've gotten. Only minor issue with mine are the post screws on the negative posts. They will snap my wire if I'm not careful. It's sometimes hard to get them secure without snapping the leads, but it's a minor problem, and I haven't had it become an issue yet. Would definitely recommend this clone, at this price you can't beat it for a flavor chasing RDA.Unknown
really good flavor from this rda
a bit harder to build than the average rda, but worth the effort. Honestly I don't get the layout of the posts on this thing. I think they made it that way just to stand out from all the others, many others out there. The flavor I get from this little dripper is among the best of all the other well known"flavor droppers". Been using it non stop since I got it. I like it a l o t. Nice quality clone. Tobeco is putting out some really good clones of late. For the price This thing is a steal!!jason