The HCigar VT133 Box Mod is manufactured with superior quality and craftsmanship and uses the same Evolv DNA200 Board as the HCigar VT200. Instead of an internal Li-Po battery, the VT133 is powered by two high amp 18650 batteries (sold separately) that are easily accessible by removing the ball bearing battery sled. Although having an internal battery is a nice feature, charging your device using a Micro USB Cord may not always be easily accessible. The VT133 eliminates the need to fully precharge your device before going somewhere since you can easily replace your low batteries with fresh 18650 batteries in a matter of seconds. Since the HCigar VT133 Box Mod is powered by two high amp 18650 batteries instead of a Li-Po battery, the maximum power output is 133W.
Features & Specifications:
Genuine Evolv DNA200 Board
Customizable Through Escribe Software
Powered By Two High Amp 18650 Batteries (Sold Separately)
Ball Bearing Battery Sled
Silver Plated Spring Loaded 510 Pin
0.911" OLED Screen
Micro USB Charging Port
Automatically Detects New Atomizer
Locked (Prevents Device From Firing)
Stealth (Turns Display Off)
Power Locked (Prevents Wattage Adjustment)
Power Preset (Saves Wattage Setting)
Output Wattage Range: 1W - 133W
Output Voltage Range: 0.5V - 6V
Input Voltage Range: 6V - 8.2V
Input Current Range: 0.5A - 23A
Kanthal Resistance Range: 0.1Ω - 2.0Ω
Temperature Control Range: 100ºC - 300ºC / 200ºF - 600ºF
Temperature Control Resistance Range (Cold): 0.08Ω - 1.0Ω
1x HCigar VT133 Box Mod
1x Micro USB Cord
1x User Manual
1x Warranty Card
Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.
Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. We will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.
Seems to be well built. My only problem with it was none of the manufacturers settings were in it so got all the settings from a friend and plugged them in. Also it had a wonky battery discharge profile so I was able to download a good one and install it through Escribe. It was showing batteries empty when they still had 3.69v. That is no longer a problem. It is dead accurate in TC now and battery bar working properly. If you don't have an understanding of Escribe you will by the time it is working right. HCigar sent them out with the generic settings from Evolve. But other then that it seems like a great mod just a little work to get set up. You can use it the way it comes but it won't be accurate till you do a little work.That's why I gave it 4 stars instead of 5 once it is dialed in it is a 5 star mod.2legsshrt
Great little mod with DNA200 chip and 133W
Love the form factor. It's a hefty little mod that fits perfect in the hand. Love the battery sled door. Makes switching batteries a breeze. LOVE that it uses (2) 18650's but is a DNA200 chip with 133w. That's plenty of power for me with the convenience of a dual 18650 and the benefits of DNA200 features. Buttons are clicky and nice. Everything about it is top notch. Evolv offers a 1yr warranty on the board. Can't beat it. Plan to get another.Unknown
I've only had this device for about two weeks but so far it has been everything I expected it to be. The look and feel is great and what can I say about the software except it is all I wanted.
I especially like the two 18650 batteries instead of the lipo pack type. This allows me to change the batteries and continue to vape instead of waiting for the battery to charge.
The Escribe software took a bit to figure out but once I did it has been the easiest software I've ever used. The ability to customize the entire vaping experience is amazing.I really doubt if there will ever be a better device for me. It fits all my needs with ease and makes me wonder why I spent so much money on other types of devices. Oldvaporuser
I absolutely love this mod. I'm a huge fan of the DNA200 board, I also have an Efusion DNA200 by Lost Vape that I also got on Eciggity. My one grip with the Efusion is the extremely poor battery life so having a DNA200 board that uses 2 18650s is a god send. The battery life still isn't very good but I always a freshly charged pair of 18650s ready to go so no waiting to charge like I have to with my Efusion. The Hcigar V133 can't get up to a true 200w because of the dual 18650s but I rarely vape above 100w anyway so the VT133 is the perfect mod for me. If you love the DNA200 board as much as I do, you will absolutely fall in love with this gem of a mod!Casey
Solid mod. Everything is working as it should. The battery door doesn't give me any issue's at all. Would be better if it slid on like an ipvd2 or ipvd3. The inside of the battery door does look bad because its not completely painted. I guess the paint would wear off from removing and installing the door. Everything else is solid with no issues. I have seen youtube reviews with loose battery doors, mine doesn't have that problem at all.Dan
AMAZING DNA Device
Since the first timie I used a DNA200 device, i fell in love with it. Its not just the way it can be customized, but its the way it vapes. I only use DNA devices now. I am NOT a fan of the lipo battery. I feel the lipo dies too quickly and I don't like that I can't swap out the battery(ies). There aren't too many DNA devices that take 18650 batteries. I dont mind it can't go past 133 watts. I barely ever get close to 100 watts anyway. This mod is super solid and feels great in the hand. Its not too bulky or too heavy. Its one of my top mods. Now, I can't wait for the different color battery doors, and I would like to see a silicone sleeve. I highly recommend this mod!!!Nadine