Geyscano 50 Watt Box Mod (Squonk) by Yiloong

Geyscano 50 Watt Box Mod (Squonk) by Yiloong

(13 reviews) Write a Review
0.60 LBS
Calculated at Checkout

13 Reviews Hide Reviews Show Reviews

  • 1
    4 Days

    Posted by Rob Houser on Mar 10, 2016

    I used this piece of crap for 4 days when it suddenly stopped working. It kept telling me to check atomizer which I did several times. The rda reads just fine on my 521 Tab and on other mods as well. Turns out that the positive connection has broken from the 510. It worked OK for 4 days and now it's a paperweight until I fix it. Very pissed off.

  • 4

    Posted by David Darby creator of the PIGS SMOKER on Mar 06, 2016

    So I opened the box and immediately the cover which slides off one of the batteries fell out. No problem I have jb weld. Im new to this vaping and my first device was a vaporesso 75vtc and requires the pre built coils and are kinda expensive about $3 each. The RDA is my first with the Geyscano and learning curve has been steep but with the help of youtube its dropped off quit quickly. After about a week of working with it and leaning with my first RDA squonker I think for the money its a decent buy. Its the first version Id have to mention which I believe the 2nd version has some upgrades. The regulator board is not as good IMO as the vaporesso and seems glitchy and has no onboard charging which for me doesnt matter. The firing button is solid and feels good. I like the box too as its a nice size and fits good in the hand. Back to the RDA I made my first twisted wire using the wire which came with the unit and learned how to wrap the wick as well with the starter pack they send with it. I like the starting kit that comes with the unit, if you are a vet your already have your own supplies but for a nubi as I am then its a good to use and work with your skill set. I like the 2nd versions RDA as it has a center pos post with two holes rather than one for the coil. I have purchased my own wire and have made my own double twisted wire coil and will see how that works when this one burns out or just to add a 2nd coil and test out the system. Again for the price of about $30 bucks from eccigity a great starter for a mod and RDA. I recommend it.

  • 5
    Squonking for $30

    Posted by Rob Houser on Mar 05, 2016

    It's a 50 watt bottom feed box for $30. First, you can't find a better 50 watt box for that price. I feel the opening to the bottle is in the wrong spot but that's my opinion. You get used to the sleep function after about a day and the corners are a bit sharp but not a deal breaker. I like it and would recommend it to anyone. I would also recommend buying from Eciggity as they are awesome with support if you have any questions about anything.

  • 5
    Great Mod for the price

    Posted by ERB on Mar 05, 2016

    I admit I didn't have high expectations for the Geyscano, but I received today and the mod is much better than expected. Clean, solid, and a great beginner squonk box. Shipping was extremely fast seeing how I live in Florida and the item was shipped from Hawaii. I will definitely order from you guys again. Thanks for the mod and great service

  • 4
    cant afford a fancy mod, GETTHIS!

    Posted by Unknown on Jan 12, 2016

    ok here goes, if you cannot afford a fancy mod such as a kangertech or something along the lines of that, then invest in this until you get something that you really wanted in a box mod, its a bottom feeder the best kind of vape you can get, and on the other side you can add a sub ohm tank if you choose to seeing that it does have 510 threading, adding a kangertech sub ohm tank on it is amazing its the best of both vape words, regulated vaping plus bottom feeding. and yes like many have said before the corners are a bit pointy but can be dealt with if one would file down the edges a tad or just leave as be and hold it to where the edges arent sticking your hands,and for the price from eciggity why not invest in one. and the only downside to me imo is it not having a usb port built in meaning one would have to get a 18650 battery charger which isnt bad because that is what vapers were doing before all the box modding and what not, but final verdict infest in one even if it's a back up

  • 1
    Not good

    Posted by Unknown on Nov 19, 2015

    Save your money

  • 2
    Well it's a regulated squonker that sports a 13 ml bottle and that's where the fun ends

    Posted by Unknown on Jul 23, 2015

    My biggest complaint about this mod is it goes into sleep mode but not only do you have to wake it up but then it takes a few seconds to activate after you press the power button. honestly I used it for about a week but it annoyed me so now it's collecting dust.

  • 3
    It's not bad at all

    Posted by Ryan on Jun 05, 2015

    For the price, this isn't a bad buy at all. People are being bitches about "sharp" corners. Common it's not that bad.

    The atty has one looong airflow slot, which I'm fine with, I have a dual side by side horizontal coil build 24g 6 wrap .3 ohm build. Right in front of the air flow.

    Yeah the center post is "loose" but I'm not a yuppie so I had success (before I built on it) tightening center post coil screw, which made the center post spin (360 degrees) as well and tightened it enough for me.

    This isn't a bad buy at all, my screen isn't crooked, buttons work fine, and firing delay at splash screen isn't that bad.

    People need to quit expecting art when their paying 60 bucks for a vv/vw squonking mod.

  • 1
    save your money folks

    Posted by Unknown on May 17, 2015

    the center post on the atty spins making it hard to get good contact. the + & - buttons on mine don't make good contact to the board. the glue let loose so it is out of whack. the chip they used is't all that great either. bunch of other issues. certainly not worth the money. overall quality just 2 thumbs down had to give it one star because there is nothing lower. yiloong dropped the ball on this one.


Introducing one of the first Bottom Feeder box mod from China! The Geyscano is a 50 Watt Box Modd that includes a Bottom Feed atomizer.


  • 50 Watts
  • Accepts 0.2 ohm -1.0 ohm
  • 13ml Juice Bottle
  • Accepts 1x 18650 Battery
  • Magnetic Battery Panel
  • Includes Bottom Feeder Atomizer 


The Atomizer is a simple 3 post design with juice holes on the bottom of the middle post. It features one long Cyclops style airflow hole that can be adjusted easily.



1x Geyscano 50 Watt Box Mod

1x Bottom Feeder Atomizer

1x Bag of O-Rings, Screws, Wick, Wire and Screwdriver

Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.
Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. Eciggity will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.