Fogger v4.1 (v4.4)

Fogger v4.1 (v4.4)

$6.99
(76 reviews) Write a Review
SKU:
1141790
Weight:
0.30 LBS
Shipping:
Calculated at Checkout

76 Reviews Hide Reviews Show Reviews

  • 3
    Not Totally Useless

    Posted by Andrew on Mar 22, 2017

    This tank... boy is it a hassle. It took me hours just to get the wicking down and I've had problems left and right. The airflow ring is useless, in fact it serves more purpose as an actual ring, and the juice feeding is to small. If any bit of wick gets into those channels even a little bit then you're in dry hit city. Light wicking and tucking under the coil and over the channel but not in works best. Even then it still feels a little on the dry side. Once you manage to crawl under the barbed wire and figure this tank out, it rewards you with a below average vape... But hey, I only got it for the antique value so I wasn't expecting much. If you want one just to own one then get it but if you're actually looking for an older tank with a good vape look elsewhere. The Kayfun V5 or Russian 91% V2 is your best bet.

  • 3
    It's Alright

    Posted by Joe McPlumber on Jun 17, 2016

    It feels a bit chintzy as compared to the Kayfun Nano and it's got nothing on the Billow. As others have mentioned, it's a finicky build. But it vapes OK and since we don't know what the FDA is up to next, you can't have too many RTAs. Totally worthwhile for the clearance price.

  • 5
    MtL flavor

    Posted by Engineer Bob on Jun 04, 2016

    The Fogger is a mouth to lung, high vapor dencity, lower vapor volume dual coil non sub ohm tank, flavor, this version ( 4.1-4.4) is known as the Tod moded version, when Tod, ( Tods reviews) reviewed the version 4.0, every single negative he addressed, was changed by YI Loong, two post, small chamber, made for flavor, machining is excellent, Vapes like a dual air/coil path Kayfun 3.1, ( a good build is a pair of 1.8 ohm coils) do not compare this with modern sub ohm dual coil lung hit tanks, small chamber required good building skills, but with 12-24 mg, at under 24 watts, MtL, superb preforming tank, ( just purchased my 7th one)

  • 4
    great product

    Posted by Unknown on Dec 19, 2015

    I like it.

  • 4
    Easy build, but be careful filling

    Posted by Shawn Hoefer on Jun 28, 2015

    The Fogger 4 rta is one of the easiest dual coil units I've ever had the pleasure of building. Wicking is almost as easy. Filling, on the other hand, can be problematic. For starters, never over tighten this tank. The o-rings get distorted and the tank leaks everywhere. Also, take it slow and easy when filling or you'll cover the base and your hands with e-liquid. Once built and filled, it's s very satisfying vape.

  • 4
    Fogger V4

    Posted by Kellie on Mar 30, 2015

    Not that easy to build on or wick but when you figure it out, it's not a bad vape. Air holes could be bigger. Good flavor, but draw is too tight for a lung inhaler.

  • 4
    overall a good rta

    Posted by Calvin on Mar 02, 2015

    The fogger v4.1 is great if you get your build right, if you mess up a little bit on the build juice will flow out of your airholes.

  • 2
    Great but pain in the ass

    Posted by En on Feb 06, 2015

    Works great once you finnally set it all up but a lot of leaking and hard to get ur coils in if your gonna have a dual coil design make jokes in the positive and negative posts or have a single coil setting because it's just the biggest bitch to set up but once you do vapes great

  • 2
    ok but not the best

    Posted by islandson555 on Jan 27, 2015

    I tried this tank on a recommendation of a friend. I wish i would have just kept my money. Bad airflow. Tough to get a good wick going. Stick with a kayfun in my opinion. Eciggity is definitely legit though!

PLEASE NOTE THIS IS A CLEARANCE ITEM. THERE IS NO RETURN/REFUND ON THIS PRODUCT.

*These Fogger v4.1 are the NEWEST versions. They reverted back to the smaller deck but kept the larger aiflow holes.*

*Added Copper(+$3) , Gold (+$3), Blue (+$3), Rainbow (+$3)*

The Fogger v4.1 is here! It features 4 juice channels as well as dual coil capability. It also has adjustable airflow ring located on the bottom for different levels of airflow. The unit itself is completely made of stainless steel and pyrex glass. The contact pin is made out of copper for minimum voltage drop. The pin is also adjustable so it can sit flush with many of your devices. The Fogger v4.1 can hold up to ~5ml of liquid as well. 

Includes:

1x Fogger v4.1

1x Screwdriver

1x Bag of O-Rings, Wick, and Wire


Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.

Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. Eciggity will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.