PLEASE NOTE THIS IS A CLEARANCE ITEM. THERE IS NO RETURN/REFUND ON THIS PRODUCT.
The Conqueror Postless RTA by WOTOFO integrates one of the first dual coil postless designs in RTA form with a 4ml tank capacity. Coil leads are inserted into four terminals that each measure 2mm in diameter and are held in place with hex screws via side tension. Due to the postless design, coil mounting is hassle-free and many coil variation can be utilized. The Conqueror has five 1.8mm adjustable bottom airflow holes on each side that taper off and block each hole individually when rotating the airflow control ring to provide the perfect amount of airflow depending on your vaping style. Top fill design is featured in the Conqueror and juice flow control is independently adjustable by rotating the top cap to prevent oversaturation of e-juice that is being fed through the four wicking ports.
22mm In Diameter
4ml Tank Capacity
Pyrex Glass Tank
Top Fill Design
Independently Adjustable Juice Flow Control
Postless Build Deck
2mm In Diameter Terminals
PEEK Insulators In Positive Terminals
Dual 3mm x 4mm Cyclops Airflow Holes On Deck
Dual Adjustable Bottom Airflow
Five 1.8mm Airflow Holes On Each Side
Airflow Holes Taper Off When Adjusted
Heat Resistant 5mm Stainless Steel Drip Tip
Gold Plated 510 Pin
1x Conqueror Postless RTA by WOTOFO
1x Bag Of WOTOFO Comp Wire
1x Bag Of Japanese Cotton
1x Bag Of Spare Parts
Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.
Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. We will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.
Love it! I've got two fused claptons in mine and it Vapes great.Unknown
This is a great flavor tank and very smooth airflowMoe beklik
This RTA gives you a very good flavor. It is fairly easy to build on, and gives a good vape. I would highly reccomend this product.Mike
Amazing flavor, Amazing flavor, Amazing deck
I bought this because I needed a new RTA and because I saw that the reviews of it mentioned it's flavor.
They are correct: this thing has some of the best flavor of any RTA and it's better than most RDAs.
The airflow compliments this tank perfectly and is on the tighter side, but not so tight that you will stress getting a lung hit: lung hits are super easy and the cloud production is astonishing
I just put in the wire it came with (twisted 26g i think) and it was ready to vape immediately.
The deck is also incredibly easy to build on and wick, so if you're looking for a new RTA, GET THIS ONE
THE QUALITY OF IT IS INCREDIBLE: smooth threads everywhere and the screws are pretty tough.Unknown
I really like this tank. It's different at first to build on, but after you get it setup and vaping it works great. The juice control on my unit was a little tight, but I got it working good after a few times refilling it. Does seem to condensate a little at first for some reason above the air holes, but after you get vaping it seems to stop and just vapes really good. I've already vaped close to 120ml in it over the last week so it works good and is high quality. I like that the tank is a 4ml so I can tank it and run around. Howard Hamlyn
Solid and Great Wicking
I grabbed this after really enjoying the EHPro Bachelor, which has a very similar deck to the conqueror. I am a big supported of the postless deck for RTA's. It allows the chamber to be small and the wicking holes to be at the same height as the coils. As a result of the wicking holes being so close and vertically aligned with the coils, dry hits are difficult to accomplish. I haven't had one to date. The airflow is smooth and open––more than I would need. There are a few issues: the just flow control and top fill threading is cumbersome. When refilling, you need to screw the juice flow control down then open the top fill which is the opposite threading of the juice flow. What ends up happening is that you'll start unscrewing the juice flow when you intend to unscrew the top fill. There isn't much material to work with (knurling would have helped). It's replaced my Billow V2 and I find I'm really not dripping that much. Unknown