Billow v3 RTA by EHPRO & Eciggity

EHPRO & Eciggity

$9.99
(63 reviews) Write a Review
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

PLEASE NOTE THIS IS A CLEARANCE ITEM. THERE IS NO RETURN/REFUND ON THIS PRODUCT.

The Billow v3 is a complete redesign of the Billow v2. We took in all the suggestions from the community to make the Billow v3 the best it can be! When designing the Billow v3, we primarily focused on airflow, flavor, and the convenience of filling and building. The adjustable cyclops airflow holes on the Billow v3 are larger to provide more airflow to your coils. We also implemented a center airflow design that provides slightly more airflow and hits the back side of your coils to bring out the flavor of your e-juice. Top filling is very convenient by simply pulling the top cap to access the fill port and closing it shut when you're done refilling. Juice flow control via turning of the top cap is available for those who want to restrict the amount of e-juice that is being wicked or to prevent oversaturation. Finally, the build deck is now a 2 post Velocity style deck allowing you to build perfectly centered coils every time!

Features:

  • 23mm Diameter
  • 4.6ml Tank Capacity
  • 2mm Diameter Post Holes
  • 2 Post Velocity Style Deck
  • 2 Adjustable Bottom Cyclops Airflow Holes
  • Center Airflow
  • Top Fill
  • Juice Flow Control
  • PEEK Insulator
  • Rebuild & Rewick Without Emptying E-Juice


Additional Glass Section for the Billow v3 can be purchased here: /billow-v3-billow-v3-plus-glass/

Includes:

1x Billow v3 RTA by EHPRO and Eciggity

1x Delrin Drip Tip

1x Extra Glass

1x Japanese Cotton Pack

1x Bag of O-Rings, Screws, Wire and Hex Tool


Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.

Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. Eciggity will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.

63 Reviews Hide Reviews Show Reviews

  • 4
    Not perfect but getting there.

    Posted by Sean on Jun 14, 2016

    Honestly, great tank. Good flavor. Easy to Build. Im only gonna mention cons cuz there are too many pros Cons: Sharp screws! Even cut some of my 24ga. Absolutely terribly hard to get the deck off sometimes. Should be better gripping but there is almost none. (combat it by not overtightening) Tank does not breakdown all the way to clean it. Other than that the leakiness was fixed by the new orings. Great tank! Top fill is a breeze.

  • 3
    After further review

    Posted by D on May 25, 2016

    I originally gave this tank a great review but after some time I'm thinking I may have jumped the gun on this. After some time owning two of these, there's some issues that I think really have hurt this tank. It weeps, and weeps, and weeps. Its fine for maybe a day or two after re-wicking but it continuously weeps juice from between the AFC and the JFC. O rings have been replaced on both of mine a number of times now, that only seems to help for a short period of time, week tops, then its back to the weeping or seeping daily, whatever you want to call it. Juice should not "leak" like this. I'm almost positive this has to do with the press fitting and inability to completely disassemble the base. I'm still a huge fan of the V2 and use them quite regularly. I think I will shelve the v3's indefinitely at this point. They are just too much of a messy hassle.

  • 4
    Great tank but...

    Posted by Matt on May 20, 2016

    Kind of expected more after the impeccable v2. I know juice control is the new thing but I hate it. I've never thought to myself "well gee I wish less juice was wicking onto my coils" but apparently enough people have to make this something worth doing. I'd have no problem with it if it was less intrusive and i could just leave it open but these juice control decks have a LOT more moving parts that can (and do) break. Furthermore, the decks of the JFC RTA's are pressure fitted so there are places on the tank that you can't repair, trouble shoot, clean and/or inspect for dirt and IMHO that's unacceptable. Exhibit A: my negative post came loose and my Billow is rendered useless as i can't get into the deck without risking damaging it because I'm not sure how it's put together. I contacted ecigitty this morning and am awaiting reply. if they won't replace it, i plan on forcing it apart to get the screw and post locked in (if anyone knows how to effectively disassemble the deck please post pics online! )

  • 5
    Great RTA

    Posted by Unknown on May 15, 2016

    This is the first RTA I've ever gotten that does not leak.

  • 5
    Great RTA

    Posted by Suzann Young on May 15, 2016

    Took a couple of re-wicking, I a somewhat new at building RTAs but once I got it, hell yeah, the flavor awesome. I am very happy with the product. Quality built, Billow keeps getting better and better. No phoney upgrades when Billow does a new version you can believe it's a better version. Fast shipping Eciggity, from Hawaii to NY wow. Thank you.

  • 5
    Billow V3 RTA

    Posted by JB on May 03, 2016

    Great RTA highly recommend.

  • 4
    Great RTA

    Posted by Tommy on May 01, 2016

    Ordering was quick and easy, shipping was fast. Great build quality and arrived squeaky clean. Velocity style Build deck and wicking channels makes things easy peasy. Much better than v2. Installed a .35 ohm build and works great. Chain vaping no dry hits or leaks. My only 2 complaints would be the grub screw wrench. There really is no reason for the wrench to not fit the screws. It's too small and would easily strip the screws So I suggest buying one that fits. Also the top fill when open is rather loose and wobbly. Once closed it's nice and tight and doesn't leak so not a big deal. Other than that great tank. As usual ehpro and eciggity nailed it. Thanks!

  • 4
    Better with every iteration!!!

    Posted by Unknown on Apr 30, 2016

    I've had all the previous billows. This is the best by far. My only complaint is the top fill cap will not seat completely. However the vape is right there with my VCMT. Good job on this one. Eagerly awaiting a nano tank.

  • 5
    The best RTA ive used to this day

    Posted by Tyler Hoerter on Apr 27, 2016

    just like the headline said its a damn good rta really good flavor had it about a week or so and been using the coils that came with along with the cotton and still gotta get used to the wicking but its worked really good i love. 10/10 would recommend to any vaper that enjoy a good rta