Image 1

Agua v2 RTA/RDA Clone by EHPRO

0.38 LBS
Calculated at checkout
Related Products
Product Videos
Also Viewed
By Category
Other Details
  • Product Description


    The Agua v2 Clone by EHPRO is a unique 22mm atomizer that can be used as either a RTA or RDA! Its exterior and interior is full stainless steel with a deck that features two posts designed with multiple holes. The post holes are constructed at different heights for more convenient building. The tank has a 4mL juice capacity and four large juice channels with two adjustable airflow holes for dual coil builds. Of course, to ensure a flush sitting the brass 510 pin is also adjustable!



    1x Agua v2 Clone by EHPRO

    1x Metal Tank Section

    1x Clear Tank Section

    1x Bag of O-Rings, Insulator, Extra Brass Pin, Screw

    Warning: This product is for advanced users only and proper precautions/handling should always be used. Never use any atomizer on a hybrid mod with a 510 connection that is flush or shorter than the 510 threading of the atomizer to avoid any possible injuries.

    Disclaimer: Please use extreme caution when working with Li-Ion (Lithium-Ion), LiPo (Lithium-Ion Polymer) and any other rechargeable batteries. The user should have fundamental knowledge of batteries and battery safety before using these types of batteries to avoid injury. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling or accidental causes even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance to local laws and mandates. We will not be held responsible for any damage or injury caused by misuse or mishandling of Li-Ion, LiPo and any other rechargeable batteries.

  • Product Reviews


    Write A Review

    1. What an utter POS

      Don't bother buying this. It's absolute garbage. on

    2. Very nice

      If the tank is wobbly, just change the o-ring at the deck. The one that came installed was too loose on mine. Otherwise, it's a nice tank. Easy to build on and works good. decent lung hitter, although I did have to open up the deck holes to replicate the dripper style of vaping. on

    3. it is not very good

      The PMMA tank section sits on the lower part a bit too loosely, it wobbles as the diameter of the deck seems to be a hair too small or maybe the diameter of PMMA and its own collar is a bit too big. One of the post screws came off, it happened as i was unscrewing the holding screw to get it ready to coil, the whole assembly of the screw housing, i.e. the post unscrewed from the deck. Wouldn't recommend it, 2nd tank from EHPRO and like their Squape it has problems. On the plus side opening and closing AFC is easier than Tobeco on

  • Find Similar Products by Category